Bronkhorst FLEXI-FLOW mass flow meter and controller
22 July, 2022 | Supplied by: AMS Instrumentation & Calibration Pty LtdThe FLEXI-FLOW mass flow meter and controller from Bronkhorst combines the advantages of a through-chip-sensor with bypass technology.
Test plant for sugar reduction in juices
21 July, 2022 | Supplied by: GEA GroupGEA and Israeli start-up Better Juice will conduct product tests on behalf of beverage manufacturers looking to lower the sugar content in drinks.
GEA Scan-Vibro Sifter type SRW
21 July, 2022 | Supplied by: GEA GroupThis product is suitable for vegan foods and can process dewatering ingredients such as spent grain or yeast from breweries, tea leaves or coffee grains.
Research centre opens to boost indoor air quality
19 July, 2022QUT is hosting a training centre that is developing building standards and technologies that would increase air quality and reduce the spread of disease.
Barry Callebaut to restart contaminated factory
18 July, 2022 | Supplied by: Barry CallebautThe chocolate manufacturing company has stated that it would soon be finished with a deep-clean of its Wieze factory and lines would soon be restarted.
App puts food under the microscope
14 July, 2022 | Supplied by: Flinders UniversityTogether with a simple magnification device, the Spotcheck app from GoMicro is able to detect spoilage and ripeness of fresh produce with a high degree of accuracy.
IDF sustainability outlook released
13 July, 2022 | Supplied by: International Dairy FederationThe IDF Dairy Sustainability Outlook is an encapsulation of the different ways that the dairy sector has been responding to the problems of sustainability.
A step closer towards a 'zero-waste' poultry industry
12 July, 2022A joint project in Singapore is repurposing waste from poultry processing, making meat trays from feathers and cultivate for cell-based meat from by-products.
Juice producer prevents food waste using technology
07 July, 2022 | Supplied by: GEA GroupWith the help of flexible technology from GEA, the company can produce twice as much juice from waste compared to its previous system.
Tackling food and beverage production challenges with predictive maintenance
06 July, 2022 | Supplied by: Open IIoTThe benefits of predictive maintenance and other 'smart' manufacturing technologies in the food and beverage manufacturing industry will be on discussion at FoodTech Qld this week.
Distribution Continuous Slide (DCS) discharge station
06 July, 2022 | Supplied by: Syntegon Technology Singapore Pte. LtdThe discharge station DCS from Syntegon is designed to ensure efficient and gentle handling of cookies and crackers.
Sawing into restaurants
06 July, 2022 | Supplied by: CBS FoodtechCBS Foodtech shares an article that was published in raremedium magazine showing renowned Chef Lennox Hastie using his Kolbe K220 band saw at his restaurant Firedoor.
Bronkhorst ES-FLOW ES-1x2C flow meter
05 July, 2022 | Supplied by: AMS Instrumentation & Calibration Pty LtdThe ES-FLOW ES-1x2C flow meter will cover the flow range just below the existing ES-1x3I or ES-1x3C.
Juice producer recognised for upcycling work
05 July, 2022FruitSmart has been awarded UFA certification for its work to produce upcycled food products and ingredients.
Renewable energy solution reduced cost for food and beverage maker
04 July, 2022 | Supplied by: Acacia EnergyNutritional food and beverage manufacturer Noumi was seeking a solution to isolate its critical production operations from power quality fluctuations on the network.
