Processing

Sanitary ceramic disc valves and actuation solutions

28 August, 2009 | Supplied by: Emech Control Limited

Emech Control designs, develops and manufactures precision control clean technology ceramic disc valves and actuation solutions. Smart technology is incorporated in application-based, simple ways to increase yields and improve operational efficiencies while reducing valve maintenance for in industrial situations.


Closed vessel UV disinfection systems

28 August, 2009 | Supplied by: CST Wastewater Solutions

Berson’s InLine+ series of UV water disinfection systems are now fully validated in accordance with the USEPA UV Disinfection Guidance Manual (UVDGM). The validation certifies the use of the systems for the Long Term 2 Enhanced Surface Water Treatment Rule (LT2ESWTR) released by EPA in November 2006.


Bottoms up as Foster’s deploys unified comms solution

28 August, 2009 | Supplied by: Cisco

Global drinks company Foster’s Group is deploying a Cisco collaboration and unified communications solution including IP communications to increase productivity and to drive operating efficiencies across its global enterprise.


Online moisture analysis for confectioner

28 August, 2009 | Supplied by: Callidan Instruments

Callidan Instruments has been approached by a Dunedin-based confectionery company interested in trialling the MoistScan MA-700 in-pipe moisture analyser.


Online fruit quality detection

28 August, 2009 | Supplied by: Proud Solutions

The Unitec QS_ON LINE 902 provides a solution for the non-destructive online detection of the internal quality of fruits without stone. The parameters measured include sugar content (°Brix), firmness expressed ( kg/cm2), ripening grade (0 and 100) and acidity (g/L).


Oxygen monitoring

28 August, 2009 | Supplied by: B-R Controls Pty Ltd

The Applied Analytics TDL-506 oxygen monitoring system uses surface-emitting laser technology to produce accurate, fast and stable oxygen measurements in even the most volatile process streams.


Knife peelers for root vegetables

28 August, 2009 | Supplied by: Reactive Engineering Pty Ltd

Sormac MS knife peelers are suitable for continuous peeling of pre-washed or pre-peeled root products, like potatoes, red beet and celeriac.


Stainless steel planetary gearboxes

28 August, 2009 | Supplied by: TEA Transmissions Pty Ltd

The MSS range of planetary gearboxes is a wash-down gearbox manufactured from stainless steel and includes lubricating grease suitable for the food processing or pharmaceutical industries.


Patties Foods implements software training

28 August, 2009 | Supplied by: Lawson Software Australia Pty Ltd

Patties Foods is a leading Australian manufacturer, supplier and marketer of branded frozen savoury and dessert products. Founded by Peter and Annie Rijs in 1966 in a small cake shop in Lakes Entrance, Victoria, the company is now ASX listed and owns a portfolio of iconic Australian brands including Four’N Twenty, Patties, Herbert Adams, Nanna’s, Creative Gourmet and Chefs Pride.


Cadbury NZ returns to cocoa butter-only recipe

18 August, 2009

Cadbury New Zealand is removing palm oil from its Dairy Milk chocolate and returning to its previous recipe in response to consumer feedback.


Don’t wash pathogens back onto the processing line

13 August, 2009

Research at Kansas State University's Food Safety Consortium shows that without proper precautions, washing floor drains in food processing plants could actually make it easier for any Listeria monocytogenes to travel from the drain to points on the processing line.


Low flow spray nozzle

13 August, 2009 | Supplied by: Spray Nozzle Engineering

Spray Nozzle Engineering says the Mini-M70LF Low Flow Spray Nozzle gives you maximum cleaning with low flow and thus, maximum water savings.


Sensors for food and beverages

15 July, 2009 | Supplied by: Thermo Fisher Scientific

MTS Systems’ Temposonics R-Series linear-position sensors Level-Plus M-Series transmitters are suitable for incorporation into automation and control applications in the food and beverage industry due to high reliability, accuracy and compatibility with smart sensor networks such as DeviceNet.


EasyPrep microwave digestion vessel

15 July, 2009 | Supplied by: DKSH Australia Pty Ltd see 1943

CEM has introduced the EasyPrep Vessel for use in the Mars Microwave Reaction System. EasyPrep has no fittings or membranes and is simpler to assemble and use than many other high-pressure/high-temperature vessels.


Stainless steel high-impact air nozzles

06 July, 2009 | Supplied by: Sprayflo Pty Ltd

Sprayflo has extended its range of high-impact air nozzles to include 1/4 and 1/8 in BSP 316 stainless steel options in five different flow rates.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd