Pelican Pack and Take ‘n Go liquid spill stations
26 July, 2010 | Supplied by: Revolution Materials
The Pelican Pack and Pelican Take ‘n Go are mobile and wall-mounted stations for cleaning up liquid spills. The cotton-based Fibercan absorbs oils, hydrocarbons (eg, petrol, kerosene) and water-based liquids and uses up to eight times less absorbent material than traditional media. Any excess Fibercan is separated out and kept for re-use.
CRIUS Solisense turbidity meter
26 July, 2010 | Supplied by: Bintech Systems Pty Ltd
The CRIUS Solisense turbidity meter ranges from 0.02 NTU (FTU) to 8% solids and is claimed to be unique in its ability to measure from NTU to percent solids in one sensor. It is suitable for potable water monitoring, filter monitoring, mixed liquor suspended solids monitoring, sludge monitoring centrate monitoring, filtrate monitoring and other applications where a traditional turbidity meter or suspended solids analyser would be used.
Parker CCIMS level-flange integrated DP manifold concept
26 July, 2010 | Supplied by: Parker (Aust) Pty Ltd
The CCIMS level-flange, a highly integrated manifold concept from Parker Hannifin, is designed to offer users a simpler means of installing level measurement instrumentation to process tanks and vessels.
Burkert LFC (liquid flow controller)
26 July, 2010 | Supplied by: Burkert Fluid Control Systems
The LFC (liquid flow controller) is fully compatible with Bürkert’s range of mass flow controllers (MFC). It complements the company’s range of compact fluid control devices for the measurement and dosage of liquids with a nominal flow rate of 10-600 mL/min and a span of 1:10. The LFC is based on the proven and tested software, hardware and mechanics of the MFC series. Due to its compact design, the controller can be installed in difficult locations, such as directly behind angled piping.
ICP Electronics WStrider-200 A rugged embedded controller
26 July, 2010 | Supplied by: ICP Electronics Australia
The WStrider-200 A rugged embedded controller is designed to operate under harsh conditions.
Amalgamated Instruments TP488 scanning monitors
26 July, 2010 | Supplied by: Amalgamated Instrument Co
The TP488 range of scanning monitors offers eight channels of input with eight configurable setpoint relays. These products are suitable for multipoint monitoring of analog transducers or temperature sensors.
Siemens Simatic CPU 317TF-2DP controller
26 July, 2010 | Supplied by: Siemens Ltd
The Simatic CPU 317TF-2DP controller from Siemens implements motion control, safety and standard tasks in one device. The controller utilises PLCopen-compatible motion control blocks and is suitable for coupled motion sequences of multiple axes.
Tiscor InspectNTrack HACCP software
11 July, 2010 | Supplied by: Arrow Scientific
The Tiscor InspectNTrack HACCP software, suitable for compliance-based inspections, assists users to schedule, track and document all activities.
Pressurex pressure-indicating sensor film
08 July, 2010 | Supplied by: Testequip Pty Ltd
Ultrasonic welding is used in packaging for many everyday items, including sealing containers, tubes and blister packs.
Breconcherry Tempest tank washer
08 July, 2010 | Supplied by: Tecpro Australia
The Breconcherry Tempest is a high-flow jetting tank washer specially designed with longer nozzles to maximise power and efficiency.
Gems Sensors & Controls Electro-Optic Level Switch
06 July, 2010 | Supplied by: Control Components Pty Ltd
Gems Sensors & Controls has introduced the solid-state Electro-Optic Level Switch for high-temperature and high-pressure applications.
Dwyer Instruments AFH2 airflow hood
06 July, 2010 | Supplied by: Dwyer Omega (Aust) Pty Ltd
The AFH2 airflow hood is designed to measure volumetric airflow from diffusers, grilles and registers. The hood maintains a running average of measurements in the desired engineering units and provides the ability to manually record measurements with the manometer on a given time period.
Baker Perkins ServoForm lollipop depositors
06 July, 2010 | Supplied by: SPX FLOW TECHNOLOGY AUSTRALIA PTY LTD
Improvements in lollipop depositing are being introduced by Baker Perkins. The piece weight range has been increased to between 9 and 31 g, and totally spherical ball lollipops can now be produced.
Mecmesin Emperor software
06 July, 2010 | Supplied by: SI Instruments
Mecmesin Emperor software for tension and compression testing has been designed for use in quality control laboratories where the mechanical properties of manufactured products need to be assessed on a routine basis.
Bizerba Ceraclean ceramic surface for cutting machines
06 July, 2010 | Supplied by: Bizerba Australia Pty Ltd
Bizerba has introduced a ceramic surface finish for cutting machines. Originally developed for use in aeronautical engineering and the computer industry, the surface is claimed to make cutting machines more robust, efficient and corrosion resistant.
